6.0 powerstroke crank no start no ficm sync

A week later it died at a light. A little background info the truck has had a crank no start for about a year now.

Ficm Sync Yes Sync No 6 0l Power Stroke Diesel Engines Diesel Technician Society

Replaced it and it started.

. Hello new here have an 05 60 stalled now cranks no start. The IPR sits around 50 when cranking at 1200psi. Ive had 60s and 64s with this be ring issues.

I have proper ICP fuel pressure and FICM voltage. I have worked my way down and tested both the Cam and Crank sensors from the PCM. I recently done diagnostic test on Ford F350 truck intermittent no start and it has longer crank all the time for about 3 seconds long.

Kyleprecision has had two 60s within a month or two with the tone ring worked loose. Idk why they do it. But the only way to.

No ficm sync no rpm signal IPR stays at 148 while crank ficm voltage does not drop below 48 double checked ficm. It idled for about an hour and then. A a month ago or so it had a no start.

Intermittent Crank No Start on a 60 Powerstroke. However I am getting no ficm sync and a cam sensor code. So we have a 2004 F350 60.

I have a 03 60 that Im diagnosing a crank no start issue on. However the FICM will not get sync. Landed up being the Ficm.

It started once randomly a few months ago after charging up the batteries.

Intermittent No Ficm Sync But Jumpstart Works Ford Power Stroke Nation